Unassembled Cold Smoking Cabinet CS-2820

Black Box BBQ

A little DIY project for you-

Here we have a flatpack version of the smaller cold smoker, 

You'll get the 9mm ply parts, the laser cut diffuser, the bottom tray, the 2 x stainless shelves, the door seal, Stainless screws, nuts and bolts. 

To reduce the costs: The hinges will be butt hinges rather than the black GRP shown, and it wont come with handles or the holes for the handles or the hanging bar or M6 eye nut. The door latches also won't be supplied and will be replaced with a simple turn button latch.

Tools you'll need: Screwdriver with PZ2 bit, 10mm spanner, Wood glue

The Cold Smoking Cabinets are made by my own fair hands using our CNC router. 

Standing 61cm tall with a smoke chamber of 45.5cm x 28cm x 20cm there is plenty of room for most projects. 

Vents are machined from Birch ply allowing you to slide the bottom intake to adjust the air flow and a top dial to adjust the air flow/ exhaust. 

Made to order please allow 14 days delivery although we will do our best to get it to you asap. 

NB: Cold smoke generator not included.

Design subject to change & constant improvement.

Design Copyright: Clockwork Scenery and George Orange


Type: Cold Smoker


    1. Made from FSC approved BB grade 9mm Birch ply
    2. Glued and screwed together with stainless steel fixings, strong GRP hinges and handles for easy carrying, this smoking cabinet is made to high standards
    3. For sheltered external use only. As you're wanting to cold smoke make sure the external air temperature isn't too high. (hence why most people do there cold smokes overnight
    1. 2 stainless steel shelves at 28cm x 20cm each.
    2. 1.5mm Mild Steel Smoke diffuser
    3. 1.5mm bottom insert for CSG to sit on
    1. Weight: 15kg
    2. 1.168 sq/m shelf area
    3. Total Capacity: 32.6 litres
    4. Height: 61cm
    5. Width: 30.3cm
    6. Depth: 22.3cm




Related Items


ga('set', 'dimension1', 'shopify_GB_1434841153591_12874289774647'); ga('set', 'dimension2', 'product.coldsmoker'); ga('set', 'dimension3', '98.00');